Our most popular models for short range BR are the B and the DS.
The SV is the smallest action and works for Hornet up to BR length cases.
The model B can handle 223-308 size cases and can be made with a hunter cut in the bottom and a dummy follower for use in Hunter Class.
The DS is the same footprint as the model B but has a smaller load port and shorter bolt throw, it also comes standard with a roller cocking piece and a second adjustable trigger hanger. This works best with PPC and BR size cases.
The 3L action has 60 degree bolt throw and works with 223-308 size cases.
The Neuvo action is built with horizontal lug lockup and is ideal for PPC and BR length cases.
The B works well for the 6BR/6Dasher and up to 308 size cases.
The MST is a Model M size action with a model B port size (3″), this give you a larger tenon, larger bolt lugs, more bedding and more bolt support.
Our model M works well for 243 Winchester to 338 Lapua mag cases.
The L is intended for unlimited rifles, and handles cases from 243 Winchester to 408Chey-Tac.
The XL is intended for Extra Long Range, and handles cases from 243 Winchester to 408Chey-Tac.
The Neuvo LR /AL actions are built with horizontal lug lockup and are ideal for BR to Short Mag cases.
The EX & EXS actions are great for 1000 yard 50Cal competitions.
The B works well for the 6BR/6Dasher and up to 308 size cases.
The MST is a Model M size action with a model B port size (3″), this give you a larger tenon, larger bolt lugs, more bedding and more bolt support. Best use is for 6mm BR, 308 and short magnum size cases
The model M is the most popular and is well suited to the majority of calibers used in F-class. It covers cases from 243 Win. up to 338 Lapua mag.
3LL is good for the 308 length if a 3 lug is preferred. (note: this is end of life 2024)
The Neuvo LR /AL actions are built with horizontal lug lockup and are ideal for BR to Short Mag cases.
You can’t go wrong with either the B or 3L. If you prefer a short bolt lift go with the 3L, it is a 60 degree lift versus the model B which is a standard 90 degree lift.
The MST is a Model M size action with a model B port size (3″), this give you a larger tenon, larger bolt lugs, more bedding and more bolt support. Best use is for 6mm BR, 308 and short magnum size cases
The model M covers cases from 243 Win. up to 338 Lapua mag.
This is all going to depend on caliber selection and the type of Varmint rifle you are after.
The SV is great for cases from Hornet to BR and make an excellent short to 500 yd type walking around rifle in a 8 to 12 lb rifle range.
The B, DS and 3L make a great action for cases based on 22-250 and up to 6MM Remington. These would be the great choices for rifles from 10 to 16 lbs and mostly shot off of a rest.
We make the VR action that can be ordered as a single shot.
The B will make a great action for the larger standard varmint cases. This includes 243, 6 & 6.5 Creedmoore and and other similar cartidges.
The MST is a Model M size action with a model B port size (3″), this give you a larger tenon, larger bolt lugs, more bedding and more bolt support.
The M is for those wanting to really reach out and get hits using bigger cases. The M handles the big cases up to 338 Lapua for the long range hunters wanting to use the strongest single shot action available.
We offer the CT model for those wanting to shoot the 408 or 375 Chey-Tac.
We also make the HR action that can be ordered as a single shot.
The Igniter has a Remington 700 short action footprint and is our lowest cost action. This means that all bottom metal for Remington 700 SA will fit including all extended length boxes created for a short action. Most stocks will fit with either no or very minor inletting changes.
The VR action is also a 700 SA footprint, this is built with an integral picatinny rail and has several different box cut options.
To make the TR action we started with our VR and added a AW mag box opening and an adjustable trigger hanger along with other features desirable in the steel shooting competitions like PRS and NRL.
The Hammerhead action takes our VR footprint to a whole new level. A new AW mag box opening that is compatible with most AICS mags was implemented. A short 75 degree bolt lift was introduced to reduce cycle time and motion while providing more scope clearance. A dual bolt stop design allows the bolt travel to be reduced by 0.35″ for optimal operation on short cases like the 6BR. All these features lead to a stellar action aimed at the PRS and NRL competitions.
The Vesper S follows the same short action footprint. It is designed to be a lightweight steel hunting action.
The Bumblebee is also a Short action and takes Short action bottom metal. However it is not a drop in 700 footprint it requires a custom or modified inlet. This action is made from aluminum and is super light. It makes for a perfect back country rifle.
The Vesper M has a medium action footprint. It is designed to be a lightweight steel hunting action for Standard, Magnum, and up to 338 Lapua size cases.
The Igniter LA has a Remington 700 long action footprint and is our lowest cost long action. This means that all bottom metal for Remington 700 LA will fit including all extended length boxes created for a long action. Most stocks will fit with either no or very minor inletting changes. Cases such as 7PRC and 300PRC as well as 338 Lapua will fit in this length action.
The HR action is also a 700 LA footprint, this is built with a 20 MOA integral picatinny rail and has several different box cut options.
The Vesper action is a light weight version of the HR action.
The Vampire is also a Long action and takes Long action bottom metal, however it is not a drop in 700 footprint. It requires a custom or modified inlet. This action is made from aluminum and is super light making it perfect for a back country rifle.
The Bumblebee and Vampire actions are among the stiffest light weight hunting actions you can find.
The Bumblebee is a Short action and takes Short action bottom metal, however it is not a drop in 700 footprint it requires a custom or modified inlet. This action is made from aluminum and is super light, it makes for a perfect back country rifle.
The Vesper S follows the same short action footprint. It is designed to be a lightweight steel hunting action.
The Vesper M follows a Medium action footprint. It is designed to be a lightweight steel hunting action.
The Vampire is also a Long action and takes Long action bottom metal, however it is not a drop in 700 footprint. It requires a custom or modified inlet. This action is made from aluminum and is super light making it perfect for a back country rifle.
The Vesper follows the Long action footprint. It is designed to be a lightweight steel hunting action.
These actions are being used for King of two Mile and other extreme long range shooting.
The CT is a great option if weight is an issue. This is the smallest action we make for the Chey-Tac cases. We make it with integral rails up to 40 MOA.
The model L is a good option for both the 338 Lapua and Chey-Tac cases when a heavy action is required.
The model XL is a good option for both the 338 Lapua and Chey-Tac cases when a heavy action is required. This includes the big body Vestal Case that uses the CheyTac rim size.
The model EXS is the smallest CT & BMG capable action we make. It is an ideal option for the CT when looking for un-compromised strength and reliability.
The EX is a longer version of the EXS and has the largest port to maximize the capability of the BMG case.
